HARLEY PARTS FOR SALE
- NOS PRESTO "CB" FIRE EXTINQUISHER
- Used on Indian and Harley Davidson. Clips onto downtube (clip not included). Fully charged. Length 5 1/2", diameter-1 5/8". New old stock.
Price-$35.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CORBIN SPEEDOMETER DRIVE
- 50 tooth to fit 4.50-18 tires. NOS gear and drive ears. Rebuilt, greased, ready to install. Price-$285.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- DAMPER SPRINGS
- Original NOS HD. Price-$8.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HAND BRAKE LEVER BRACKET
- Fits 1928-1938. Part # 4151-28. Original HD, needs repair. Price-$28.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SHIFTER SHAFT SWIVEL BEARING
- Type 2 with zerk fitting. Fits 61 & 74. Part # 2235-15. Original HD, NOT REPRO. Price-$52.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- RELAY BRACKET AND SCREWS
- Fits 1947-1964 OHV. Part # 4786-47 (new number-74765-47). Original HD, NOT REPRO, fresh chrome. Price-$22.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- INNER CHAIN GUARD REAR BRACKET-NOS
- Fits 1936-61" OHV, 1937-1948Part # 3806-36. Original NOS HD. Price-$12.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH HUB BEARING PLATE
- 1941-1948. Part # 2475-41. Original HD. Price-$12.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PUSH ROD BEARING
- 1939-1948. Part # 2448-39. Original HD. Price-$18.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH SPRING NUT SECTOR-NOS
- 1912-1929 61" & 74". Part # 2509-12. NEW OLD DEALER STOCK. Price-$8.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER CRANK GEAR-24 TOOTH
- 1936-61" OHV, 1937-1938 4 speed, 1939-1948. Part # 2144-36. Original HD. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BEARING HOUSING RETAINING PLATE
- 1936-61" OHV, 1937-1979 4 speed Big Twin. Part # 2162-36A. Original HD. Price-$8.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- ROLLER BEARING RACE OUTER
- 1917-1924. OD-2.750, ID-2.435, Width-.730, Outside lip-2.908. Part # 2284-17, formerly # 491. NEW OLD STOCK.
Price-$8.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH HUB BALL BEARING RETAINER
- Fits 1941-1948 74' & 80". Part # 2473-41. Original HD. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH HUB BALL BEARING RETAINER
- Fits 1941-1950 45". Part # 2473-41A. Original HD. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER BALL BEARING HOUSING
- Fits 1916-1929 61", 1921-1935 74" Twin. Part # 2126-16, formerly # 426. Original HD, good condition.
Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- GEAR SHIFTING FORK AND GEAR LOCK PLATE SHAFT AND NUT
- Fits 1915-1929 61", 1921-1936 74" & 80". Part # 2241-15 & 2246-15, formerly # 462, # 465, and #463. Original HD,
good condition. Price-$32.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 1942-1943 WLC AUXILIARY OR CANADIAN ISOLATION SWITCH
- 1942-1943 Auxiliary wiring switch, also Canadian WLC, ELC stop lamp isolation switch. Can be used on other years.
One wire cut short. Original HD. Price-$85.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 1939-1946 LICENSE PLATE BRACKET-NOS
- Fits Knucklehead, Panhead, Flathead. Part # 5092-39. This is new old stock that has fresh chrome plating, from the
Jack Muro dealership in Scranton, Pa. Original HD. Price-$55.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- MAINSHAFT THIRD GEAR
- Fits 1936-1957 61", 74" & 80". Part # 2296-36B. Original HD. Price-$32.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- MAINSHAFT LOW AND SECOND GEAR
- Fits 1936-61" Twins, 1937-1948 4 speed. Part # 2297-36. Good condition. Original HD. Price-$85.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS 1915-1935 SLIDING GEAR FORK
- Part # 2247-15. World's largest collection of NEW OLD STOCK sliding gear forks. Original HD. Quanity discounts.
Fits 1915-1929 61", 1921-1935 74" Price-$8.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SLIDING GEAR FORK AND SHAFT
- Fits 1915-1929 61", 1921-1935 74". Part #'s 2247-15 & 2248-15. Original HD. Good condition. Price-$14.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SLIDING GEAR FORK SHAFT
- Fits 1915-1929 61", 1921-1935 74". Part # 2248-15. Original HD. Good condition. Price-$6.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- COUNTERSHAFT GEAR
- Fits 1916-1926 Twins. Parts # 2303-16 (formerly # 502), includes # 505 and #503. Good condition. Original HD.
Price-$225.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH DUST RING
- Fits 1920-1929-61", 1921-1935-74" Twins. Part # 2501-20 (formerly # 595). Original HD. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- MAIN DRIVE GEAR
- Fits 1913-1926, all three speeds. Part # 2296-15 (formerly 498). Very good condition, no wear in sprocket slots.
Original HD. Price-$165.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- TRASMISSION COUNTERSHAFT AND THREADED BUSHING
- Fits 1916-1931 61" & 74" J, JD, V, VL. Part # 2300-16 (formerly # 748). Original HD. Some minor pitting on
races, may clean up with emery. Price-$26.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- TRASMISSION COUNTERSHAFT
- Fits 1916-1931 61" & 74" J, JD, V, VL. Part # 2300-16 (formerly # 748). Original HD. Some minor pitting on
races, may clean up with emery. Price-$18.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER COVER CAP, CLUTCH RELEASE FORK
- Fits 1926-1929 "61", 1926-1935 "74". Parts # 2133-26 & 2435-26. Original HD. TWO STYLES AVAILABLE.
Price-$85.00 a set
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH CRANK AND LOCK FINGER
- Fits 1915-1919 Three speeds. Part # 843, 848 & 849. Factory # DG549. Original HD. Price-$95.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FRAME BRACKET
- Fits 1915-1929-61" & 74". Part # 2231-15. Original HD. Price-$46.00 EACH
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH ACTUATING PLATE
- Fits 1919-1929 (61 & 74). Part # 2505-19. Original HD. Pins worn. Price-$32.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH RELEASE LEVER, AND CLUTCH RELEASE FORK
- Parts: 2426-26, 2435-26. 1926-1927 Twins. Price-$105.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH RELEASE LEVER, STUD AND CLUTCH RELEASE FORK
- Parts: 2426-30, 2430-28, 2435-26. 1928-1929 61" & 74" Twins. Price-$105.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS BRAKE PULL
- Unsure year. New Old Stock. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS BRAKE LOCK HANDLE AND BOLT
- Parts # 89102-37, 89108-37, 7691, 7035. 1937-1957 Knucklehead and Panhead. Original HD. Price-$95.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BRACKET, HAND LEVER
- Part # 45023-65 (hand lever), 45030-65 (clamp), 1207W (screws). 1965-early 1969 Panhead, Shovelhead, Iron
head. Original HD. Price-$25.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FENDER RAILS AND MOUNTS
- Vintage original fender rails and mounts. #1-$65.00, #2-$54.00, #3-$72.00, #4-$32.00, #5-$18.00, #6-$18.00,
#7-$18.00.
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SEAT HAND RAIL
- Fits Buddy seat, Chum-me seat, solo seat. Harley Davidson or Indian. Rare piece. Nice original patina.19" long,
8 1/2" between holes. Price-$75.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HARLEY DAVIDSON BUDDY SEAT HANDLES
- 1933-1952, EL, FL,VL,UL,WL. Part #s 52547-33. Price-$48.00 Pair-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HARLEY DAVIDSON BUDDY SEAT HANDLE
- 1933-1952, EL, FL,VL,UL,WL. Part # 52547-33. Price-$25.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BUDDY SEAT PARTS
- Used on FL, FLH 1941-1964. Includes parts; 52596-36, Spring clip heavy (3), 52543-36, Plate, seat bar (2),
52600-36, Spring clip, light, 5674, Bolt, nut, washer.
- Price-$45.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SEAT RAIL
- Used on Harley and Indian buddy/chum-me seats. Price-$75.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLAMP, WIRE
- Clamp to fit 1 1/4" tube. Original Harley Davidson. Used in 1930's up. Price-$12.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLAMP, WIRE
- Clamp to fit 1" tube. Original Harley Davidson. Used in 1930's up. Price-$12.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH ACTUATING ARM, CONNECTING LINK, PIN
- Fits 1915-1925. Parts # 856 (2434-19)-Clutch actuating arm, #853 (2439-15)-Connecting link, #858 (2441-19)-Connecting link
pin, # 0108-C.L.Pin nut. Original Harley Davidson. Price-$65.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PEDAL AXLE, WASHER, LOCKNUT AND NUT-NOS
- Fits 1915-1928-61" & 74", 1929-1948 Twins. Part # 2095-16. Price-$40.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PEDAL AXLE-NOS
- Fits 1915-1929-61" & 74", 1929-1948 Twins. Part # 2095-16. New old stock Harley Davidson. Price-$35.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BATTERY COVER-RADIO BATTERY
- Fits 1949-1962 FL, FLH. Part # 66376-49, fits battery # 66002-49AD. This is for the RADIO BATTERY,
51 amp hour-6 volt. Original Harley Davidson. Price-$25.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS 16" SPOKES AND NIPPLES
- Fits 1960-1984. New old stock, chrome plated steel. Fits FL, FLH. Length aprrox. 7". 40 Spokes, slight tarnish from
sitting on shelf. Price-$45.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SIDE VALVE DISTRIBUTOR
- 1937-1946 Base and shaft. Base part # 1566-37.
- Price-$85.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SIDE VALVE DISTRIBUTOR BASE
- 1947-1948 Base. Base part # 1566-47.
- Price-$38.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SIDE VALVE DISTRIBUTOR
- 1947-1948 Base, shaft, points and cover. Base part # 1566-47.
- Price-$110.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SIDE VALVE DISTRIBUTOR
- 1937-1946 Base, shaft. Base part # 1566-37.
- Price-$85.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH PULL ROD
- Fits later 1919-1924. Part # 2445-19. Length 11". Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- GENERATOR END PLATE
- Fits Models 235B and 235C. Parts # R247 (grease cup), R211 (right end plate), and R242 (right bearing
cover plate). These are teens model parts. Price-$48.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CURRENT AND VOLTAGE REGULATOR
- Fits 1958-1964 FL, FLH. Part # 74500-58A. Standard generator. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FRONT CYINDER-JD ERA
- Front cylinder, believed to be late 1922. BORE IS 3.43. Threads in good condition. No scratches in bore,
just some rusting. A couple broken fins, as can be seen. Valve seats appear to be in good condition. Has a "arrow"
stamped on the base, do your research. More pictures available on request. Price-$475.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- REAR CYLINDER HEAD
- Fits 1929-1935 "45". This is the High Compression head, marked 5.5 compression. Part # 10-29A.
Includes a Leonard 5-HD spark plug in good condition. Price-$75.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- WHEEL OUTER STAR COVER
- Fits 1956-1966 all models. Price-$28.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FOOTBOARD STUD-NOS
- 1936 "61", 1937-1957 Big Twin. NEW OLD STOCK. Part # 2949-36
Price-$15.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH TUBE ASSEMBLY
- 1941-1957 "45". Part # 36975-41. Price-$18.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH TUBE ASSEMBLY
- 1947-up "45" three hole frame. Part # 36975-47. Price-$18.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 1937-1938 THREE SPEED SHIFTER GATE
- Fits 1937-1938 Twins. Part# 2909-37B. NEUTRAL, FIRST, SECOND, THIRD. ORIGINAL HD. Price-$100.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CONNECTING LINK
- Fits all three speeds, 1915-1919. Part # 853. Original plating. Price-$22.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 1936-1940 KNUCKLEHEAD-FLATHEAD CLUTCH HUB AND THRUST PLATE
- Fits 1936-61" OHV, 1937-1940. Part # 2741-36. Has crack from hub to stud (as pictured). Price-$18.00-Sh3
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SPOTLIGHT BAR
- Original chrome, nice patina. Price-$48.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS GEAR LOCK PLATE
- Used on 1915-1925. Part # 2239-15. New old stock, original plating. Price-$45.00(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BRAKE LEVER
- Part # 4056-30. Fits 1930 74" Tw. Price-$38.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- LIGHTWEIGHT CENTER STAND
- Unsure of year. Price-$125.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FRONT BRAKE DRUM
- Fits 1936-1948 Big Twin, 1941-1957 Servi car and WLC, 1937-1950 Servi car rear brake, 1937-1957 BT sidecar brake.
Origianl HD. Price-$85.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- EARLY REPRO KNUCKLEHEAD DASH COVER
- Fits 1938-1946 Knucklehead. Repop from the 1980's. Nice patina. Made by R.B. Enterprises. Price-$65.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS INTAKE NIPPLE
- Fits 1940-1954 Big Twin. Inside diameter-1 9/16", OD-1 15/16", 1 3/4".
Price-$14.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS BRAKE/CLUTCH PEDAL RUBBER
- Accessory which attaches to the clutch or brake pedal, get better footing! New Old Stock, extremely rare.
Price-$68.00-Sh2
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HD CHOKE CONTROL LEVER
- Used on 1938-1957. Part # 1233-38. Chrome. Price-$36.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HD CHOKE CONTROL LEVER
- Used on Knucklehead era Linkert carbs. Price-$36.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 45" FRONT AXLE
- Length-9.1875, diameter-.375-24 thread. Part # 3910-30. Price $18.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- DRIVE DISC
- Part # 2489-19. Fits 1919 TO 1926 TWINS. Original HD. Price-$60.00-(Sh2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PULL ROD OUTER BALL RACE
- Part # 2452-26. Fits 1926 to first 1932-61" & 74". NOS. Original HD. Price-$38.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH SPRING COLLAR
- Part # 2547-26. Fits 1926-1928 Singles. NOS. Original HD. Price-$8.00 EACH-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SPRING
- Overall length-3", diameter-9/16". Price-$6.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SHUT OFF ROD-PAN, KNUCK, FLATIE
- 1940-1964 Gas tank shut off rod. Fits Panhead, Knucklehead, Flathead tanks. Origianl HD. Price-$25.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BREAK LEVER BRACKET
- Rear mechanical. Fits 1936-1940 EL, 1941-1957 FL, 1936-1948 UL. Has been repaired on back of stud. Good
threads, some wear. Price-$24.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SIDECAR MUDGUARD BRAKE CLIP
- 1915-1922. Inner brake clip, sidecar mudguard. NEW OLD STOCK. Price-$16.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- AXLE NUT
- 11/16"-20. Price-$8.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CROSS SHAFT ARM
- Description to follow. Price-$16.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SPRING WASHER-NOS
- Fits 1936-1948 Big Twin, 1940-1957 "45". Part # 54031-33. New old stock. Price-$8.00-(2)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER GEAR ADJUSTER
- Fits 1916-1931 61" & 74". Part # 2134-16. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HD SPARK PLUG # 2
- Fits Knucklehead era. Price-$85.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PLUNGER TUBE CAP
- Fits 1925-1935. Part # 3559-15. Price-$30.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 45" CLUTCH RELEASE LEVER
- Part # 37052-44. Fits 1944-1952 Solo, some WLA's. 2 1/8" wide. Selling the pair, one good, one fair.
Price-$55.00 pair
- E-mail: Indian Gauge LLC
-------------------------------------------------
- INNER PRIMARY "45"
- Part 3804-41. One good, one modified. Fits 1941-1963 "45". Original HD. Price-$35.00 Pair
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- GEAR BOX COVER
- Singles and 45 Tw. Price-$25.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- GEAR BOX COVER
- Fits later 1928-1929 Singles and 45 Tw. Part # 2260-28A. Price-$45.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER COVER
- Fits 1919 up. Has some repair. Price-$65.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STARTER COVER
- Fits later 1919-1925. Part # 2126-19. Price-$65.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HARLEY DAVIDSON SPARK PLUG
- Has HD script, original vintage. Price-$10.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HARLEY DAVIDSON SPARK PLUG
- Has HD script. Price-$10.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- POWER FLOW COMPENSATOR
- Made by Southern Products for pre-compensator Harleys, Panhead, Knucklehead. Takes the power pulses
out of the engine, smoothes out ride, saves drive train. Missing nut. Price-$150.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FISH TAIL
- Made by MCM mfg. co., Whittier, Ca. Fits 1 5/8 pipe. New old stock. 1950's vintage.
Nice on Bobbers, Baggers, etc. Price-$65.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- FUEL FILTER
- 1950-1965. Filter and strainer. Price-$65.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- AXLE SPACER
- Fits .625 axle, 1.00 step. Price-$12.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HILLCLIMB GAS CAP
- This cap pressurized the tank for "slant artists", so they would get a constant supply of fuel on the
hillclimb. 1916-1935. Part # 3507-16 (cap #). Price-$45.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- INSIDE HEADLAMP BULB MOUNT
- Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- REAR AXLE SPACER
- For 9/16" axle, length 3 1/8", 3/4" diameter, 1 1/4" diameter step. Price-$18.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- LIGHT SWITCH HOUSING
- 1929-1948 Price-$18.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- WIRE FASTENING SCREW-NOS
- 1948-up. Price-$12.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- COVER-NOS
- Price-$24.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PUSH ROD/LIFTER END
- End diameter-9/16". Price-$14.00 each-2 available.
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- REAR BRAKE ROD CLEVIS
- 1948-up. Price-$14.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- REAR BRAKE ROD CLEVIS
- Part # 4067-30, 1936 "61" OHV, 1937-1948. Price-$18.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BRAKE CLEVIS
- Price-$12.00 each-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STEP WASHER
- Price-$3.00 each-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- RELIEF PIPE NUT
- 1918-1921. Part # 337. Price-$18.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HORN BRACKET
- . Price-$35.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- PIN
- Price-$8.00
- E-mail: Indian Gauge LLC
----------------------------------------------------
- WINTER WINDSHIELD MOUNT
- Price-$18.00-(1)
- E-mail: Indian Gauge LLC
----------------------------------------------------
- ROCKER FOOT CLUTCH SPRING
- Fits 1939-1943 EL, 1939-1942 UL. Original. Price-$25.00
- E-mail: Indian Gauge LLC
----------------------------------------------------
- HARLEY DAVIDSON SERVICE SHOP DOPE MANUAL
- Contains Service Shop(30 issues) plus bulletins (in factory binder): #256, Apr.10, 1947-Delco Remy Regulator bulletin (10 pages),
Generator wiring diagrams: #121G-Jan.30, 1940-Radio generator model 32E2R, #121-
Feb.14, 1935-1929-1945 generators, #121A-Feb.14,1935-1935-1930 and later Singles,
#121B, Feb.14-1935-Model 32E-32, later 45" & 74", #121C, Feb.14-1935-Model 30D,
1930 & 1931-45", #121D, Feb.14-1935-1930 & 1931 74",
#121E, Feb.14-1935-1929 & earlier Single, 61" & 74", Mar.24, 1947-
Transmission specs-Big Twin #256-1947 Wiring diagrams-four pages, 1947 Gear ratios,
Domestic and export (30 ratios for servi, side car, solo, alum. heads, iron heads, OHV,
Sidevalve-45", 61", 74", #221-motor fitting specs, #221G-Tuning specs, 1930 up, 74", 45", 30.50",
21 cu.in. in SV and OHV, #229-Model M Linkert rebuid, #218-Apr.4, 1941-crank case baffle
plates and connection rod arrangement-45", 1937 up, OHV, 1936 up, 74"-80" S.V., 1937 up,
#242-Feb.10, 1945-Roller bearing guide, #242A, Mar.4, 1946-Bearings, sizes and were used, #247
May 22, 1946-Connecting rod identification guide, 1932 & later-45", 74", 80"SV, 61" & 74" OHV,
#250-May 27, 1946-Crankpins, #251-July 1, 1946, Preventive maintanence, #252-Nov. 1, 1946-Tires,
wheels and speeds, #252A-Tire inflation, #254-Feb.1, 1947-Servi-car tow bar, plus more.
WILL NOT COPY!
Price-$325.00
- E-mail: Indian Gauge LLC
----------------------------------------------------
- BOLT, WINGNUT-HD
- Early, Price-$8.00
- E-mail: Indian Gauge LLC
----------------------------------------------------
- BOLT-HD
- Price-$3.00 Pair-(1)
- E-mail: Indian Gauge LLC
----------------------------------------------------
- FOOT REST, RIGHT AND LEFT
- Part # 11241-30, 1930-1936 74" & 80", Buddy seat parts. Price-$65.00 Pair
- E-mail: Indian Gauge LLC
----------------------------------------------------
- NOS HARLEY FRONT END/WHEEL ASSEMBLY
- This fits 1969-1971 Harley Davidson (plus more), it has an Indian stem that has been mounted,
it must be changed to fit HD), it was put on an Indian Chief when new, and never ridden on
the road, it is all New Old Stock. The tire still has the nubs. Price-$1000.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HD-JD FLOORBOARD MOUNT
- Size-4.0 inch overall, threaded stud-.375. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HD EARLY TRANS. PART
- Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- 1948-1952 SPEEDOMETER CABLE
- Fair to poor condition. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- CLUTCH ASSIST-"MOUSE TRAP"
- Missing adjusting screw. 1952-1967. Price-$125.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- REAR AXLE SLEEVE-CHROME
- Fits 1936-1957 "74". Part 4008-36. Price-$26.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- "45" CAM COVER
- 1937-1959, Part#584-37A. Price-$225.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- STAR HUB
- 1937-1954, All models. Price-$175.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS BIG TWIN POSTCARD
- Showing early 1950's Panhead/Hydralic front end, with description on reverse. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- INSIDE HEADLAMP WIRING
- Part 4935-35. 1935-1940
- Price-$26.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- OIL PRESSURE SWITCH
- Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- OIL PRESSURE SWITCH
- NOS. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- OIL PRESSURE SWITCH
- NOS. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- OIL PRESSURE SWITCH
- NOS. Price-$18.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- SPORTSTER "K" MODEL OIL PUMP BODY
- Pump body, oil pressure switch and fitting. Part labeled-2621552
- Price-$100.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- KNUCKLEHEAD OIL PUMP BODY
- Fits 1939-1940 Knucklehead, part 281-35,contains check valve assembly
- Price-$225.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- TAIL LITE AND HEADLIGHT CONNECTORS
- Used on 1920's-1930's tail lites and headlights. Price-$16.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- EIGHT BALL SHIFT LEVER
- EIGHT BALL SHIFT LEVER. THIS WILL FIT THE RATCHET TOP HARLEY DAVIDSON TRANS. THIS IS AN ORIGINAL LEVER FROM THE 1950 PERIOD, IT IS NOT A NEW EIGHT BALL. IF YOU RAN ONE OF THESE YOU KNOW WHERE THE "EIGHT" CAME FROM. YOU WEREN'T A ROCKER OR MOD....YOU WHERE A HOOLIGAN! THIS IS AN ORIGINAL EIGHT BALL STRAIGHT FROM THE TABLE.
- Price-$40.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- NOS HD SPROCKET
- XR,XR750,KR,XRTT DIRT TRACK SPROCKET, 17 tooth countershaft sprocket, NOS in box
- Price-$55.00
- E-mail: Indian Gauge LLC
----------------------------------------------------
- NOS LAMP BRACKET PLATE
- Part # 2629-23, used on 1923-61" motors. New old stock. Original parkerizing
- Price-$55.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- BATTERY CASE REAR BRACKET-NOS
- Part # 4415-24, Used in 1924, NOS
- Price-$45.00-(1)
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HARLEY DAVIDSON/GOULDING SIDECAR HUB SHELL AND AXLE
- Goulding "Litecar" sicecar used on HD in 1929-1931, hub shell part # 6903-29, axle # 6885-29, includes # 6165-28A
- Goulding parts listed in "A Restoration Guide for 1929-1936 45" Twins. Price-$240.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HD, HENDERSON, CROCKER, INDIAN, FLYING MERKEL SIDECAR AXLES
- Sidecar axles from teens to the thirties
- Price-$85.00 each
- E-mail: Indian Gauge LLC
-----------------------------------------------------
- HD JD DEALER TOOL COLLECTION
- Tools from 1920's-1930's, originally from Muro Harley Davidson, Scranton, Pa.
- Array of original engine and frame tools, nice displaly board for serious collector. You ship or pick up. Price-$2000.00
- E-mail: Indian Gauge LLC
-----------------------------------------------------